Trucking maintenance software starts with a PM program: build one for 2 to 10 trucks
By Edwin Horton, Truck dispatcher · Updated
Most small fleets shop for trucking maintenance software before they have a maintenance program for it to run. The software then becomes a nicer-looking version of the same problem: oil changes logged after the fact, inspection reports in a glovebox, and a brake job nobody saw coming.
This guide builds the program first, in four layers that match what federal rules ask for, then maps software features to those layers and gives you five numbers to run it by. Our broader truck fleet management guide covers maintenance as one of six systems; this page goes deep on that one.
What the rules ask for
The base rule is short. You must systematically inspect, repair and maintain every vehicle you control, and for each one you control for 30 consecutive days keep: its identification, a way to show the type and due date of each inspection and maintenance task, and a dated record of what was done Systematic maintenance and the records it needsSystematically inspect, repair and maintain; for each vehicle controlled 30 consecutive days: ID, a means to show type and due date of each inspection and maintenance task, and a dated record of each one49 CFR 396.3(a): every carrier must systematically inspect, repair and maintain (or cause to be) all vehicles under its control, with parts and accessories in safe and proper condition at all times. 396.3(b): for each vehicle controlled for 30 consecutive days, keep (1) identification (company number if marked, make, serial number, year, and the owner's name if not owned), (2) a means to indicate the nature and due date of the various inspection and maintenance operations, and (3) a record of inspection, repairs and maintenance showing date and nature. 396.3(c): kept 1 year where housed or maintained and 6 months after the vehicle leaves your control.49 CFR 396.3Checked Oct 2026. Those records stay 1 year where the truck is housed or maintained, and 6 months after it leaves your control.
Around that sit three more rules: drivers inspect before driving and report defects after the trip Driver inspection before drivingBe satisfied the vehicle is safe; review and sign the last report if it listed defects49 CFR 396.13: before driving, a driver must be satisfied that the vehicle is in safe operating condition, review the last driver vehicle inspection report if one was required, and sign it to acknowledge that required repairs were certified.49 CFR 396.13Checked Oct 2026 Driver vehicle inspection reportWritten post-trip report when a defect is found or reported; not required when there are none49 CFR 396.11: drivers report at the end of each day's work on each vehicle any defect or deficiency affecting safe operation (brakes, steering, lights, tires, coupling, wheels, mirrors, emergency equipment and more). Property-carrying drivers are not required to prepare a report if no defect is found or reported. The rule doesn't apply to carriers operating only one CMV.49 CFR 396.11Checked Oct 2026, and every truck gets a periodic inspection at least every 12 months Annual inspectionEvery 12 months49 CFR 396.17(c): a CMV may not be used unless each component in Appendix A has passed an inspection at least once in the preceding 12 months.49 CFR 396.17Checked Oct 2026.
The program in four layers
- 1
Layer 1: the unit file
396.3(b)(1)
One file per truck and trailer: unit number, make, VIN, year, owner if leased, warranty terms, tire sizes, filter numbers. Everything a shop asks for on the phone. - 2
Layer 2: the schedule
396.3(b)(2)
Each service with its trigger (miles, engine hours or days) and next due point. A, B and C services from the manufacturer's schedule, plus the annual inspection date. - 3
Layer 3: the work history
396.3(b)(3)
Every PM, repair and inspection with the date, odometer, what was done and the invoice. Roadside inspection reports go here too. - 4
Layer 4: the defect loop
396.11, 396.13
Driver reports a defect, someone decides repair now or schedule, the repair is recorded, and the next driver sees it closed. No open safety defect goes back on the road.
Build the schedule from the engine and chassis manufacturers' maintenance manuals for your duty cycle, not from a generic list. A day-cab regional truck and a team sleeper running 12,000 miles a month should not share intervals. The preventive maintenance schedule generator turns your intervals and monthly miles into due dates per unit.
What trucking maintenance software should do
Map every feature you're shown to a layer. Features that don't serve one are nice to have.
| Layer | Software feature | Ask in the demo |
|---|---|---|
| Unit file | Asset records with VIN, specs, warranty, documents | Can I attach titles, warranty sheets and photos per unit? |
| Schedule | PM triggers by miles, engine hours or days; alerts | Does it pull odometer from my ELD or telematics, or do I type it in? |
| Work history | Work orders, shop invoices, parts and labor, cost per unit | Can an outside shop's PDF invoice be attached and coded? |
| Defect loop | Driver inspection reports from a phone, defect status | Does a defect stay open until someone marks it repaired? |
| Audit | Report of every record for one unit and date range | How fast can I hand an auditor one truck's last 12 months? |
| Cost | Cost per mile by unit, by system (tires, brakes, engine) | Can I export it to my accounting software? |
We don't rank vendors. Check each one's own current pages for features and pricing, note the date, and run the demo with your own trucks loaded. If the same platform also runs dispatch and invoicing, our guide to trucking dispatch software covers what to check on that side.
Spreadsheet or software
A spreadsheet meets the rules if it's current: one tab per unit for layers 1 to 3, a calendar for due dates, a folder for invoices, and a written defect process. It breaks when:
- Odometers are typed in by hand and fall weeks behind.
- Trucks run on different schedules and nobody owns the sheet.
- Defects reported on Friday are forgotten by Monday.
- You use several outside shops and invoices arrive by text.
Our opinion: at two or three trucks, discipline beats software. At five, the time you spend chasing odometers and invoices usually costs more than a subscription.
Five numbers to run maintenance by
| KPI | Formula | Why |
|---|---|---|
| PM compliance | PMs done on time ÷ PMs due | The program is either running or it isn't |
| Road calls per 100,000 miles | Breakdowns needing service away from a shop ÷ fleet miles × 100,000 | Missed PMs show up here first |
| Maintenance cost per mile | Repair and maintenance spend ÷ miles, by unit | Compare units, and compare with benchmarks |
| Scheduled share | Scheduled spend ÷ total spend | Planned work is cheaper than roadside work |
| Defects closed before next dispatch | Defects closed ÷ defects reported | The safety half of the program |
For a benchmark, ATRI's 2025 data put repair and maintenance at $0.215/miRepair and maintenance cost per mile, 2025$0.215/miATRI's 2026 Operational Costs of Trucking: repair and maintenance (parts, labor, roadside service; tires counted separately at about $0.05/mi) averaged $0.215 per mile in 2025, up 8.6% from 2024. Truckload fleets under 5 trucks averaged $0.275 per mile, against $0.169 for fleets over 1,000 trucks. By region: Midwest 21.4, Northeast 22.1, Southeast 19.8, South Central 19.4 and West 21.9 cents per mile.ATRI, Operational Costs of Trucking (2026 edition), 2025Checked Oct 2026 on average, higher for the smallest truckload fleets.
EXAMPLE A four-truck fleet's October: 6 PMs due, 5 done on time (83% compliance). Fleet miles 40,000 with 2 road calls (5 per 100,000 miles). Maintenance spend $9,800, so $0.245 a mile. Scheduled work $6,400 of that (65%). Drivers reported 14 defects and 13 were closed before the next dispatch (93%). The missed PM was unit 103's, and one of the two road calls was unit 103's. That's the conversation for Monday.
Working with outside shops
Most fleets under ten trucks don't run their own shop, so the program has to travel with the truck. Give every shop you use the same short sheet:
- What a PM includes at each tier on your schedule, so an A service means the same thing in Dallas and in Memphis.
- What the invoice must show: unit number, VIN, odometer, date, the work done and parts used. That invoice is your 396.3 work record, so a vague "PM performed" line doesn't help you in an audit.
- An approval limit. Anything over an agreed dollar amount needs a call to you first.
- Warranty status for the engine and aftertreatment, so warranty work isn't paid twice.
Keep a short list of roadside service vendors along your usual lanes, too. A road call you planned for costs less than one you search for at 2 a.m.
Monthly maintenance routine
- Pull odometers and engine hours for every unit.
- List everything due in the next 30 days and book shop time.
- Review open defects and close or schedule each one.
- Code every invoice to a unit and a system.
- Calculate the five numbers and compare with last month.
- Check annual inspection dates for the next 60 days.
Set aside a repair reserve alongside the program; the maintenance reserve calculator sets an amount per mile. More systems guides are in the playbooks library.
This page is general information, not legal advice. Follow your manufacturers' maintenance schedules.
Fleet maintenance software: common questions
01What is the best semi truck fleet maintenance software?
We don't rank vendors. The best fit for a small fleet tracks each unit's PM schedule by miles, engine hours or days, stores dated work history and shop invoices, takes driver inspection reports from a phone, and reports cost per mile by truck. Ask for a demo with your own trucks and last year's invoices loaded.
02Do I need maintenance software for two trucks?
Not necessarily. A spreadsheet with one tab per truck and a shared calendar meets the record rules if it's kept current. Software starts to pay when you have several trucks with different schedules, an outside shop network, or nobody who owns the spreadsheet.
03What maintenance records does the DOT require?
For each vehicle you control for 30 consecutive days: identification, a way to show the type and due date of each inspection and maintenance task, and a dated record of inspections, repairs and maintenance. Keep them 1 year where the vehicle is housed or maintained and 6 months after it leaves your control.
04How do I set PM intervals for my trucks?
Follow the engine and truck manufacturer's schedule for your duty cycle, then adjust for your own history. Many fleets run an A, B and C service tier by miles or engine hours. The annual inspection is a separate federal requirement every 12 months.
05Can fleet maintenance software connect to my ELD?
Many products can pull odometer readings, engine hours and fault codes from an ELD or telematics unit, which keeps PM due dates current without typing. Ask which ELD brands each vendor connects to, whether it costs extra, and what happens to your records if you switch ELDs.
06What is a good maintenance cost per mile?
ATRI reported repair and maintenance averaged 21.5 cents a mile in 2025, and 27.5 cents for truckload fleets under 5 trucks. Your number depends on truck age, duty cycle and region; track your own trend by unit.
SOURCES CITED ON THIS PAGE
- 49 CFR 396.3: Systematic maintenance and the records it needs, checked 2026-10-27
- 49 CFR 396.13: Driver inspection before driving, checked 2026-10-11
- 49 CFR 396.11: Driver vehicle inspection report, checked 2026-10-11
- 49 CFR 396.17: Annual inspection, checked 2026-10-10
- ATRI, Operational Costs of Trucking (2026 edition): Repair and maintenance cost per mile, 2025, checked 2026-10-11