Skip to content
HaulCaptainFLEET DISPATCH DESK

Hub to hub trucking: how relay networks work, and how a small fleet can run one

By Edwin Horton, Truck dispatcher · Updated

Hub to hub trucking is a simple idea with three different uses. Big truckload carriers use it to get long-haul freight moving while drivers sleep at home. LTL carriers use it between terminals every night. And autonomous trucking companies use it to keep driverless trucks on the highway while people handle the city streets.

For a small fleet, the useful version is the first one: a relay. This guide explains all three, then shows the hours-of-service math and equipment a 2 to 10 truck fleet needs to run a relay of its own.

Three meanings of hub to hub

  • TRUCKLOAD RELAY

    Swap at the midpoint

    Two drivers start at opposite hubs, meet halfway, exchange trailers and drive home. Hubs typically sit no more than 300 miles apart.

  • TERMINAL LINEHAUL

    Terminal to terminal

    Freight moves between terminals on scheduled runs, then local trucks handle pickup and delivery. Common in LTL and parcel networks.

  • AUTONOMOUS

    Transfer hubs

    A human driver takes the trailer to a hub by the highway, a driverless truck runs the highway leg, and a human finishes the delivery.

Same idea, different networks.

The relay definition comes from Penske Logistics: drivers meet at a midpoint, exchange trailers and return to their home hubs the same day Hub-and-spoke truckload relay (Penske Logistics)Drivers meet at a midpoint, swap trailers and return to their home hubs; hubs typically no more than 300 miles apartPenske Logistics glossary: hub and spoke is a network of facilities that lets truckload freight move long distances with single drivers. Drivers meet at a midpoint, exchange trailers and return to their originating hubs; hubs are typically positioned no more than 300 miles apart, so drivers get home each day while the freight keeps moving.Penske Logistics, What is hub and spokeChecked Oct 2026. The autonomous version was laid out in a 2022 Uber Freight whitepaper as a stepping stone toward full autonomy Autonomous hub-to-hub model (Uber Freight whitepaper, 2022)Human driver to a transfer hub, autonomous truck on the highway leg, human driver for the final legTalk Business & Politics, August 31, 2022, on an Uber Freight whitepaper: a human driver takes a loaded trailer from the shipper to a transfer hub, an autonomous truck carries it on the highway, and a human driver completes delivery. The whitepaper called it a stepping stone toward full autonomy that lets developers earn revenue early.Talk Business & Politics, Aug 31, 2022, 2022Checked Oct 2026, and Aurora began driverless deliveries between its Dallas and Houston terminals in 2025 Driverless heavy trucks in commercial service (Aurora)Aurora announced regular driverless customer deliveries between Dallas and Houston on May 1, 2025Aurora Innovation's May 1, 2025 release announced commercial driverless trucking on the Dallas to Houston route, with terminals at each end, and plans to expand to El Paso and Phoenix. Later status should be checked in Aurora's current filings.Aurora Innovation press release (Business Wire), May 1, 2025, 2025Checked Oct 2026.

Why relays work for drivers and owners

Drivers sleep at home. For many drivers, home time decides whether they stay, and a relay gives it every night without giving up long-distance freight.

Trailers keep moving. A trailer can cover two driver shifts in a day instead of one.

Planning gets simpler. The same drivers run the same roads to the same swap point. Fewer surprises, fewer missed appointments.

The cost: you need freight at both ends, more trailers than trucks, and a place to swap that is safe, legal and open when your drivers arrive.

The hours-of-service math for a relay

A property-carrying driver can drive 11 hours within a 14-hour window after 10 hours off, with a 30-minute break after 8 hours of driving Hours of service, property carriers11 hours driving in a 14-hour window after 10 hours off; 30-minute break after 8 hours driving49 CFR 395.3(a): after 10 consecutive hours off duty, a property-carrying driver may drive up to 11 hours, and may not drive after the 14th hour since coming on duty. A 30-minute interruption in driving is required after 8 cumulative hours of driving. 395.3(b): no driving after 60 hours on duty in 7 days or 70 in 8 days; a 34-hour off-duty period restarts the count.49 CFR 395.3Checked Oct 2026. A relay has to fit inside that every day, with time for inspections, the swap and fuel.

EXAMPLE Two hubs 420 miles apart, swap point at the halfway mark. Each driver drives 210 miles out and 210 back.

StepTime
Pre-trip inspection0.5 hr
Drive to swap point, 210 mi at 50 mph average4.2 hr
Swap trailers, walk-around, paperwork0.5 hr
30-minute break0.5 hr
Drive home, 210 mi4.2 hr
Fuel and post-trip0.5 hr
Total on duty10.4 hr (8.4 hr driving)

That fits the 11 and 14 hour limits with room for traffic. Stretch the hubs to 600 miles apart and the same day becomes 12 hours of driving, which doesn't fit. That's why relay hubs stay close together. This EXAMPLE is wider than the 300-mile spacing Penske describes; it works only because the HOS math still fits.

What a small fleet needs to run a relay

  1. Freight at both ends. A relay that runs full one way and empty the other loses money on every mile back. Look for a customer or broker lane with volume both directions, or a backhaul market at each hub.
  2. Trailers. At least one more trailer than trucks at each hub, so a trailer is always loading while another is on the road.
  3. A swap point. A secured lot, a customer's yard or a leased drop space. Truck stop parking is not a plan.
  4. Two drivers on matching schedules. If one is late, the other waits on the clock.
  5. Insurance that fits. If you pull trailers you don't own, you need trailer interchange coverage and a written interchange agreement.
  6. A plan B. When a truck breaks down, someone has to cover both halves of the run.

Hub to hub freight you can haul without your own network

You don't need two hubs of your own to haul hub-to-hub freight. Some shippers and carriers buy linehaul or drop-and-hook moves between their own facilities, often on a schedule. These look like dedicated trucking: the same lane, the same times, steady miles. Ask what equipment they expect, whether trailers are provided (power only), how detention is paid and who handles the swap paperwork.

When a relay is the wrong move

  • You have one or two trucks and no lane with daily volume both ways.
  • Your drivers prefer longer runs with more miles and fewer stops.
  • The swap point would add deadhead that eats the home-time benefit.
  • Nobody on staff can watch two drivers' timing every day.

If you're unsure, a trucking consultant can model the lane, and trucking dispatch software can track two drivers and four trailers once you start. More growth playbooks are in the playbooks library.

Hub to hub trucking: common questions

01

What is a trucking hub?

A yard or terminal where trailers are staged, swapped or sorted between drivers or between local and long-distance moves. Large carriers run networks of them; a small fleet's hub might be its own yard plus a leased drop lot near a highway.

02

Is hub to hub trucking the same as LTL?

No, but LTL carriers use the idea. They move freight between terminals on linehaul runs and deliver locally from each terminal. Truckload relays move full trailers between hubs without unloading.

03

Do hub to hub drivers get home every day?

That's the main reason relays exist. When hubs are close enough that a driver can reach the midpoint and come back within hours-of-service limits, the driver sleeps at home and the trailer keeps moving.

04

How does autonomous trucking use hubs?

In the model Uber Freight described in 2022, a human driver takes a trailer to a transfer hub near the highway, an autonomous truck runs the highway leg, and a human driver delivers from the second hub. Aurora began driverless deliveries between Dallas and Houston terminals in May 2025.

05

How far apart should relay hubs be?

Close enough that each driver can reach the swap point and come home inside the 11-hour driving and 14-hour duty limits, with time for inspections, the swap, fuel and traffic. Work it out from your real average speed on that road, not the speed limit, and leave an hour of slack for bad days.

06

What equipment does a relay need?

More trailers than tractors, so a trailer is always loading or unloading at each end, plus a safe swap point and trailer interchange agreements if you pull trailers you don't own.

SOURCES CITED ON THIS PAGE

DESK OPEN 24/7

Relay lanes still need loads at both ends

Our desk finds freight that fits your hubs and swap point, and calls you with each offer to approve or pass.

4% for 2+ trucks, 5% for one, 7% while your MC is new